Tuesday, May 01, 2007

Point of no Return


This is me taking an air hammer to my house. This seemed like a good idea at some point. The theory is to round the edges of the doors and windows so that when the stucco is applied we soften everything up a little. Knowing this doesn't make it any easier to take a chisel to a perfectly good brick wall. I mean, I'm past the point of changing my mind here. That ship has sailed.


Then there are the repairs to the roof. When the orginal repairs were done, a huge industrial strength ruber sheet was installed to prevent leaking. Alas, it wasn't installed quite right. When we get too much rain, the water creeps over the edge of the ruber and seeps into the cinderblock leading to small leaks. But small leaks take their toll. Plus the material doesn't drain away from the house enough and the topsoil isn't thick enough by our garage. So we're digging, adding new material, sealing it, covering it and laying new topsoil. Joy. The first job was so close, but just didn't get it right. Everything about this house is a learning experience, sometimes a painful one. The good news is that they're bringing over a kind of mini Bobcat front loader. I'm hoping to get them to level out some of the pits in the yard and clean up by our burn pile. I very much doubt they will let me operate this machine, but a man can dream can't he?

1 comment:

Anonymous said...

You took an air powered chisel to your house??? At what point did this seem like a good idea???

Recently I detached the elevated deck from my house with a chainsaw while I was walking on it (the alternative was to be under it) so in retrospect, maybe we need to reconsider the source of our home repair advice...

grim